Voltas Non Inverter AC Error Code List
Sl No | Error Code | Error Details | Reset |
1 | EE | Indoor machine EE fault | |
2 | E0 | Outdoor EE fault | |
3 | E1 | Indoor fan fault | |
4 | E2 | Indoor fan zero-crossing detection abnormal | |
5 | E3 | Indoor coil fault and sensor fault | |
6 | E4 | Indoor ambient temperature sensor fault | |
7 | E5 | Fan Operation Error | |
8 | E6 | Indoor and outdoor machine communication fault | |
9 | E8 | Outdoor communication fault | |
10 | F1 | Compressor starting abnormal | |
11 | F2 | Compressor out of step fault | |
12 | F3 | IPM module fault | |
13 | F4 | Compressor shell roof fault/protection | |
14 | F5 | Discharge temperature sensor fault | |
15 | F6 | Section temperature sensor fault | |
16 | F7 | Outdoor coil temperature sensor fault | |
17 | F8 | Outdoor ambient temperature sensor fault | |
18 | F9 | Outdoor DC fan fault | |
19 | P1 | Outdoor machine AC current protection | |
20 | P2 | Compressor phase current protection | |
21 | P3 | Outdoor unit over-high or over-low AC voltage protection | |
22 | P4 | DC voltage over-high or over-low voltage protection | |
23 | P5 | IPM over-high temperature protection | |
24 | P6 | Discharge temperature overheat protection | |
25 | P7 | Cooling indoor coil anti freezing protection | |
26 | P8 | Cooling outdoor coil overheat protection | |
27 | P9 | Heating indoor coil overheat protection | |
28 | PC | Cooling outdoor ambient temperature over-low protection | |
29 | PH | Heating outdoor ambieent temperature over-high protection | |
30 | L1 | Drive bus voltage over-high protection | |
31 | L2 | Drive bus voltage over-low protection | |
32 | L3 | Drive phase current overload fault | |
33 | L4 | Phase current samping abnormal | |
34 | U1 | IPM Over current protection | |
35 | U3 | Compressor Over current protection | |
36 | U4 | Over voltage protection | |
37 | U5 | Low voltage protection | |
38 | U7 | Over speed protection |
Voltas Inverter AC Error Code List Voltas Split AC Error Code List
Sl No | Error Code | Error Details | Reset |
1 | E1 | The trouble of indoor unit room temperature sensor | |
2 | E2 | The trouble of indoor unit pipe temperature sensor | |
3 | E3 | The trouble of PG motor | |
4 | E5 | Wired controller communication failure | |
5 | E6 | The EEPRO of indoor unit error | |
6 | 1E | The trouble og outdoor unit room temperature sensor | |
7 | 2E | The trouble of outdoor unit pipe temperatue sensor | |
8 | 3E | The trouble of exhaust sensor | |
9 | 4E | The EEPRO of indoor unit error ( outdoor unit). Replace the module board of outdoor unit | |
10 | 8E | The trouble of PFC. Replace the module board of outdoor unit | |
11 | H1 | Automatic defrosting | |
12 | H3 | Stop for compressor overload protection | |
13 | H4 | Overload protection | |
14 | H5 | Stop for IPM module protection | |
15 | H6 | PG motor does not operate ( indoor fan motor) | |
16 | HC | PFC overcurrent malfunction | |
17 | L9 | High protection of power | |
18 | LP | Indoor and outdoor units cant match with each other | |
19 | PH | High voltage protection | |
20 | PL | Low voltage protection | |
21 | C5 | Jumper cap malfunction |
Read more
Maintenance Of Equipments
Now, let’s talk about the Preventive maintenance of the following equipment.
- Transformer Preventive Maintenance.
- Street Light Preventive Maintenance.
- AC Maintenance.
- DG Set Maintenance.
- Preventive Maintenance of ACB.
- Preventive Maintenance of Capacitor Bank.
- Preventive Maintenance of Lifts.
- Preventive Maintenance of Earthing.
- Preventive Maintenance of Ceiling Fans.
- Preventive Maintenance of Power Panels.
- Preventive Maintenance of Circuit Breakers.